10 Segment - 4-color LED Bar Display


10 Segment -  4-color LED Bar Display
Stock Number: 37890 OP
 Review Average:  
 Number of Reviews: 1
 View ReviewsReview this item
$1.50

Did we sell out of a part you need?
You may be able to purchase it directly from our overseas supplier.

Please note the following restrictions:
   •   $50 minimum per line item
   •   $100 minimum per order

To inquire, contact:

Supplier: Aqua Jiang
Email: aquajiang1@outlook.com

When emailing, please use “MPJA Customer” as the subject line and include the MPJA stock number and quantity needed. The supplier will respond with pricing, lead time and shipping costs.



SHARE
    
     Email this to a friend     

Detailed Description

Bargraph style LED Display contains 10 individual LEDs;
one Blue, four Green, three Yellow and two Red
Suitable for battery indicator, power level etc.
NOTE: LEDs Only NO Driver Electronics
Beveled Case Corner=Pin 1 (Blue LED Cathode)
Pitch: 2.54mm
Pins: 20
Forward Current: 15mA/LED max
Forward Voltage:
Red: 2.5V/Yellow: 2.0V/Green: 2.8V/Blue: 3.0V
Reverse Voltage: 5V (Max)
L: 26mm W: 10.5mm H: 8mm O/A WT: .006


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
Bought 2. One had a bad segment.
I checked these with a DMM on diode check. The first one was fine. The second one had a dead blue segment. The meter showed .74V in the forward bias direction. Then, I reversed the leads and observed 1.62V. I've never seen an LED behave like that. For comparison, the blue segment of the good display read 2.52V forward biased, and open reversed biased, as expected.
- Joe Stanko, IL